MANUFACTURED TO THE HIGHEST QUALITY.
SERVICED TO THE HIGHEST STANDARDS.
Gilian Air Sampling Pumps & Calibrators
The product expertise of Sensidyne’s Factory Service Department is very extensive across all GILIAN air sampling pumps and calibrators: GilAir pumps, BDX pumps, AirCon area samplers, and air flow calibrators Gilibrator 2, Gilibrator 3, and Go-Cal.
US Factory Repair & Service Rates
» Submit US Service RMA Request Form
Outside the US?
Find an Authorized Sensidyne Service Center
Factory Certified Calibration
As a Laboratory accredited to ISO/IEC 17025:2017 standards, the Sensidyne Service Department provides ISO 17025 compliant calibration and repair of the following Sensidyne products:
- Gilian Gilibrator 2USB and Gilibrator 3 Calibrators
Subject to the same standards, the Sensidyne Service Department provides NIST-Traceable calibration and repair of the following Sensidyne products:
- Go-Cal Calibrator
- Nephelometer Dust Monitor
Why Factory Calibrate?
An annual ISO/IEC 17025 or NIST-traceable calibration by Sensidyne’s ISO accredited facility provides a defensible audit trail. Calibration of your Sensidyne instrument includes a full product refurbishment and calibration. Our industry recognized calibration experts (with over 100 years combined Sensidyne experience), accreditations, and traceability ensure accuracy and peace of mind. Proprietary procedures, software, and test fixtures refurbish your instruments to both commercially available and unpublished specifications.
What is Included in Factory Calibration?
- Disassembly and examination of the instrument for wear and damage
- Full cleaning, repair and/or replacement of parts as needed
- Battery test/replacement as needed
- Upgraded firmware and hardware
- Multi-point flow calibration (customer specific points can be added)
- NIST traceable calibration certificate with As-Found (optional) and As-Left data (OR)
- ISO/IEC 17025 accredited calibration with As-Found (optional) and As-Left data
- 180-day service warranty
Calibration NIST-Traceable Services
- Quality Management System (QMS) certified to ISO 9001:2015 standards
- NIST-Traceable Certificate with Data: Provides analysis of an instrument’s data
- Tolerances Provided
- As-Found (optional)/ As-Left Data Provided
- ISO/IEC 17025 Accredited
- Accreditation Includes ANSI/NCSL Z540-1-1994
Calibration ISO/IEC 17025 Services
ISO/IEC 17025 Certificate with Uncertainties includes all of the NIST services (see above), plus, provides detailed measurement uncertainties and ratio data that enable an analysis of measurement risk with Detailed Uncertainties Provided:
- Test Uncertainty Ratio (TUR) Calculation Provided
- Enables Evaluation of Risk in Instrument Applications
Factory Repair
All Factory repairs must have a Return Materials Authorization number (RMA).
The repair prices include fault isolation, replacement of faulty components and test to factory specifications. Factory Repair will carry a warranty of 180 days in accordance with the current terms and conditions.
Please include all documentation with the equipment when returned to the Factory.
Include a Purchase Order for the specified Flat Rate amount plus shipping. The PO must include Contact Name and Phone Number, Shipping Address, Billing Address, Shipping Method and the correct total dollar amount, plus shipping charges.
MasterCard, American Express, & Visa are accepted for payment.
All equipment returned must be intact and include all parts. We will not attempt to repair equipment which has been returned in pieces or is missing significant parts. Include a description of the failure or malfunction with the returned equipment in order to ensure that the problem will be fully addressed.
US Factory Repair & Service Rates
» Submit US Service RMA Request Form
AFTER receiving an RMA number please send your equipment to:
Sensidyne, LP
Attn: RMA number
1000 112th Circle North, Suite 100
St. Petersburg, FL 33716
Contact us to inquire further:
800-451-9444 x781
+1 727-530-3602 x781
Email the Service Team
* * * * * * * * * * * * * * * * * * * *
Svantek U.S. Authorized Factory Service Transitions to OHD.
Effective October 3, 2022: servicing of all Svantek equipment will be performed by OHD out of their Birmingham, Alabama offices.
» Go HERE for Svantek Factory Service at OHD
* * * * * * * * * * * * * * * * * * * *