Sensidyne Industrial Health and Safety

Gilian 5000 Personal Air Sampling Pump (20 - 5,000 cc/min)

Gilian 5000 - 5LPM Personal Air Sampling Pumps for High Backpressure Applications

Gilian 5000 Personal Air Sampling Pump (20 - 5,000 cc/min)


The Gilian 5000 is a high-performing personal air sampling pump leading the industry in back-pressure performance, reliability and ease-of-use. The pump offer flow rates up to 5000 cc/min, and thanks to several advanced features, the pump overcome the main causes of sampling errors, saving you time and money. The air flow display holds calibration for 30 days, even with atmospheric changes. The back-pressure capabilities of the Gilian 5000 are the highest in the industry for any personal sampling pump.   

Gilian 5000

  • Up to 5 LPM
  • Highest back-pressure capability
  • Programmable
  • Live flow display
  • NiMH battery
  • EN1232 - Type P compliant

Gilian 5000 Part Numbers


Part Number


Pump Kit

Includes: Gilian 5000 Pump, 36 inches Tubing and User Manual.


Gilian 5000 Pump Kit, Pump Only, No Charger

Starter Kits

Includes: Gilian 5000 Pump, Single Unit Charger, Filter Cassette Holder, 36 inch Tubing and User Manual.


Gilian 5000 Starter Kit, 120/240V, US Cord


Gilian 5000 Starter Kit, 120/240V, UK Cord


Gilian 5000 Starter Kit, 120/240V, No Cord


Gilian 5000 Starter Kit, 120/240V, Euro Cord

Five-Pack Kits

Includes: Five Gilian 5000 Pumps, One 5-Unit Power Station, Five Filter Cassette Holders, Five Pieces of 36 inches Tubing and Five User Manuals and One Carrying Case.


Gilian 5000 5-Pk, 120V/240V , US Cord


Gilian 5000 5-Pk, 120V/240V , No Cord


Gilian 5000 5-Pk, 120V/240V , Euro Cord


Gilian 5000 5-Pk, 120V/240V , UK Cord

Gilian 5000 Kit Descriptions:

  • Pump kits includes 1 air sampling pump, 36?_? Tubing, and a manual.
  • Starter kits include 1 air sampling pump, a single unit charger, 36?_? tubing, filter cassette holder and manual.
  • Five-pack kits include 5 air samplings pumps, a 5-unit power station, 5 filter cassette holders, 5 manuals and a carrying case.

Note: Products with International Plugs, or non-120V products are not available for sale within the United States.

Discover the Gilian 5000 Air Sampling Pump

Fast-charge NIMH battery ends "memory" problems.

With the 5000 there is less risk of lost samples due to battery failure. Both models incorporate a nickel-metal hydride (NiMH) battery which, unlike a NiCd battery, doesn't suffer from "memory" problems. So theres no hidden loss of battery capacity, no shorter-than-expected run time and no need for special battery maintenance. You use our standard charger and get the same, highly predictable life, charge after charge.

When the display indicates a "full" battery, that's exactly what the pump delivers. Plus, the indicator more accurately displays remaining life throughout the sampling period. You get faster charging too. The NiMH battery charges in under four hours. And you won't be hampered with special storage or disposal requirements, since the NiMH battery is friendly to the environment.

Power equals higher flow rates and higher back-pressure capabilities.

Gilian 5000 Low Flow AdapterThe Gilian 5000 provides automatic constant flow from 800 cc/min to 5000 cc/min. When used with a low flow module, they also handle low flows from 20 to 800 cc/min under constant pressure control, such as required for multi-flow sorbent sampling. These pumps offer significantly higher back-pressure capabilities than competitive pumps thanks to a more advanced pneumatic design and a more powerful power source. As a result, dense particulate buildup on the filter, such as with dusty environments is far less likely to trigger premature pump shutdown and an incomplete sample. See the chart on the following page for back-pressure information.

Programmable automatic restart when faults occur.

Both the 5000 have an intuitive automatic restart feature that will attempt to save a sample should a fault occur. If the filter becomes clogged or tubing pinches not allowing air to pass, the pump will shut down and attempt to restart every 3 minutes for up to 30 minutes. This option is selectable on the 5000.

Four-button design is easier to understand and operate.

Easy to use four-button designThese pumps are easy to understand and configure, just four keys control everything. There are no codes to enter or difficult key sequences to remember. Operation is simple, intuitive and less prone to error. So you're up and running in less time. To secure your settings from tampering, 5000 has a lockable keypad after setup and calibration.

Easy to calibrate and set-up.

Air flow settings and calibration of the flow rate display are done through the keypad, requiring the use of only an air flow calibrator. This means you can set up your pump and begin sampling quickly. The pumps also perform an automatic self calibration of internal temperature and pressure measurement when initially placed in the run mode and whenever the ambient temperature changes by more than 3??C during sampling.

Flow DisplayLive flow display confirms proper pump operation.

Monitoring the pump for proper operation is easy. A large digital display continuously cycles to show flow rate, sample run time and total volume sampled. You receive immediate, real-time feedback, including live flow, not just the flow setting which quickly alerts you to any sudden changes in flow rate.The wearer can stop the pump, such as for a break and the display remains active. After 75 minutes, the pump automatically turns off the display if there's no activity but retains all sample data.

Gilian 5000 Personal Air Sampling Pump

Flow Rate, Max

5 Liters Per Minute

Flow Rate, with Low Flow Module

20 cc/min - 800 cc/min

Flow Rate, Standard

800 cc/min - 5000 cc/min

Flow Compensation 1000 cc/min

70" H20 back-pressure (17.4 kPa)

2000 cc/min

60" H20 back-pressure (15.0 kPa)

3000 cc/min

50" H20 back-pressure (12.4 kPa)

4000 cc/min

30" H20 back-pressure (7.5 kPa)

5000 cc/min

20" H20 back-pressure (5.0 kPa)

Constant Flow Control

+/- 5% of set flow at 800-5000 cc/min


Yes, four stage

30-Day Calibration


EN 1232 Compliant


Live Flow Display


Charging Time

Under 4 Hours

Memory-Free Battery

Yes, NiMH

Four-Button User Interface

Yes, with lock-out feature

Run Time

8 hour minimum

Flow Fault

+/— 5% set flow, fault icon appears; if fault exceeds 30 seconds pump shuts down. Pump will attempt restart every 3 minutes for up to 30 minutes.

LCD Display

Yes; Flow Rate, Total Sample Time, Total Volume Sampled, Charge Status , Program Settings.

Hazardous Approval Ratings

FM: Class I, Division I, Groups A, B, C & D
Class II, Groups E, F & G

Class III, T4

CE: Ex II 1 G, Ex ia IIC T4