GilAir Plus - The World's Most Capable Air Sampling Pump Now with 3 New Technologies!
3 New Technologies
- Motion Detection
- Bluetooth Connectivity
- CONNECT Mobile App*
- QuadModeSM Air Sampling Technology
- Selectable Automatic Fault Recovery
- Standard Temperature & Pressure Correction
- Superior Design & Comfort
- Real-time Clock with Data-logging
The ultimate personal air sampling pump delivering enhanced performance, greater versatility, and superior design and comfort.
Detect and measure up to 3 levels of activity (active, stationary, inactive) of each worker, ensuring sample integrity
- Remotely monitor an air sampling pump up to 5 meters away
- No disturbance of the worker
- Stay in unrestricted areas while workers are in restricted areas
- No need to suit up
CONNECT Mobile App
- Start, stop or pause the sample remotely
- Monitor and graph flow rate, sample run time, and volume remotely
- Perform real-time remote assessments:
- Identify if cassette is overloading
- Identify if filter media is detached
- Sample audits provide the following right on the smart phone/tablet:
- Report of current conditions
- Screen shot of current conditions
- Time stamp
- GPS coordinates (actual address)
- Pump number
- E-mailable report
- Check the status of multiple pumps in the same area.
List of tested iOS Devices:
8.0 to 10
iPhones 5, 5C, 5S, 6, 6+, 6S, 6S+, iPod Touch and iPad
*The Google app for Connect Mobile is not currently available for download via the Google Play Store. Sensidyne is working to correct this issue. We will update this site when the android platform becomes available once again.
This list will be updated as new smart phone/tablet models are released and assessed.
Please contact Sensidyne ’s Software Support Team at [email protected] with questions regarding additional devices or support for this application.
The Widest Flow Range of Any Personal Air Sampling Pump
The GilAir® Plus features wide dynamic flow and pressure ranges to address all personal air sampling methods with flow ranges between 20 and 5,000 cc/min. With patent pending QuadModeSM air sampling technology, the GilAir Plus can perform both high-flow constant pressure and constant flow (450-5,000 cc/min) and low-flow constant pressure and constant flow (20-499 cc/min) with a single pump without external adaptors. It's like getting two pumps in one.
- Samples particulates, vapors, gases, and metal fumes
- Works with all common sampling media
- Multi-language capability: English, Spanish, French, Italian, Dutch, Portuguese and German
- Outlet port for bag sampling
GilAir Plus is a smart air sampling pump that provides ambient or standard temperature and pressure corrected display (STP model) and data-logging for up to 16 sampling events (STP and Datalog model). The pump has high back pressure capability of up to 40" H2O in high flow and up to 40" H2O in low flow. An automatic self check system ensures sample accuracy. In the event of a fault condition, the pump's selectable automatic fault recovery feature attempts to restart the pump up to 10 times every 3 minutes to determine if the fault condition has been cleared.
Ease of UseAn intuitive menu, keypad interface and large, easy-to-read back-lit display makes adjusting pump settings quick and easy. Once the pump is set up, the keypad can be locked to prevent tampering. Convenient and innovative SmartCalSM feature provides automatic pump calibration.
One-third smaller than traditional personal air sampling pumps and weighing less than 21 oz. (595 g), the GilAir Plus provides superior operator comfort. An integrated belt clip securely attaches the pump in a horizontal position, allowing workers a full range of motion to perform a wide variety of tasks without interference or discomfort.
The GilAir Plus dock provides charging and communication functions for the STP and data-logging models. Once docked, the PC application allows users to review datalogs, generate sampling reports, manage sampling programs, and create pump set-up profiles that expedite deployment of large pump fleets. The SmartCalSM feature uses the dock as a communication link between appropriate calibration devices and the GilAir Plus. SmartCalSM automates calibration and records pre and post sample calibrations in the pump's datalog.
Gilian CONNECT is our industry-leading PC application for managing air sampling data and Gilian Plus Series pumps.Click to learn more about Gilian CONNECT
Barometric Pressure Compensation
When sampling at altitudes of up to 8,000 feet above or 8,000 feet below sea level, GilAir Plus has the capability of automatically correcting the flow rate for altitude changes to maintain constant flow accuracy of +/- 5% over this barometric pressure range. This feature permits GilAir Plus calibration at ground level and sampling at high elevations or deep mines without loss of flow accuracy or the need to calculate and use manual correction factors. GilAir Plus is the only personal air sampling pump with this capability.
Download the Barometric Pressure Sampling Note
Current Version: 2.5.4 (6/20/17)
Constant flow 20 - 5,000 cc/min. without external adaptors
Constant pressure 1 - 5,000 cc/min without external adaptors
Constant Flow or High and Low Flow Constant Pressure
Flow Display ± 5% or 3 cc/min of set flow, whichever is larger
Constant Flow Control ± 5% or 3 cc/min of set flow, whichever is larger
Constant Pressure Control ± 10% of back-pressure
Back Pressure Capability
(8-hour runtime) 5000 cc/min. up to 12” H20 back pressure
4000 cc/min. up to 20” H20 back pressure
3000 cc/min. up to 30” H20 back pressure
2000 cc/min. up to 30” H20 back pressure
1000 cc/min. up to 35” H20 back pressure
450 - 1000 cc/min. up to 40” H20 back pressure
20 - 449 cc/min. up to 40” H20 back pressure
Run Time 8 hour minimum
Flow Fault If flow changes exceed 5% within back pressure specifications, fault notification appears. If fault exceeds 30 seconds, pump shuts down. Selectable automatic fault recovery allows the pump to attempt restart every 3 minutes for up to 10 times or to hold until manual intervention
Operating 32°F to 113°F (0°C to 45°C)
Storage -4°F to 113°F (-20°C to 45°C)
Charging 41°F to 104°F (5°C to 40°C)
Operating 5-95 %RH, non-condensing
Storage 5-98 %RH, non-condensing
Display Flow rate, sample time, and sample volume in actual conditions
Indicators Green and Red LED’s
Dimensions 4.3 x 2.4 x 2.4 inches (10.9 x 6.1 x 6.1 centimeters)
Weight 20.5 ounce (581 grams)
Warranty 2 years from original shipment, 5 years for pump keypad, and 1 year on rechargeable NiMH battery pack
Power Options Removable rechargeable nickel-metal hydride (NiMH) battery pack, optional alkaline battery pack, or DC power
Battery Level Indicator On-screen icon displays battery level
Interface Connectors All pump interface is carried out via the Dock or keypad
Dock Functions Battery charging, computer interface, and auto-calibration
Charging Time Under 3.5 hours
EN 1232 Compliant Ingress Protection: IP54
US/Canada NRTL (FM) Class I, Div 1 Groups A, B, C, D, E, F, and G;
Class II, Div 1 Zone 0; Class III, T4
II 1 G
Ex ia IIC T4
Applicable Directives ATEX 94/9/EC
EMC 2004/108/EC (RFI) LVD 2006/95/EC
Click on a file below to open. Visit our Technical Library for further documents and resources.
Gilian CONNECT is the update and upgrade to the previously released Gilian Pump and Data Management Software. CONNECT allows users to import previous databases to take advantage of its extended features and capabilities.
Gilian CONNECT is an essential tool that assists Industrial Hygienists and Occupational Health and Safety professionals to overcome the challenges of organizing air sampling data, creating sampling reports and managing pump fleets.
Centralize sampling data for reporting, analysis, archiving and retrieval.
Save time with reusable report templates and auto-complete data from database entries
Enter lab result data into sampling records and quickly create customizable reports for printing, PDF e-mailing, or saving to disk
Configure and program air sampling pumps for rapid deployment
Gilian CONNECT is the ultimate air sampling data and pump management solution that automates tasks and simplifies record administration. The application can be fully customized to user preferences including measurement units, storage of worker information, and creation of reporting templates. Gilian CONNECT will save professionals valuable time while enhancing analysis capabilities and gaining improved control over their sampling data.
Download Gilian CONNECT Software
To download Gilian CONNECT pump and sampling data management software submit your name and email address. A secure link will be emailed to you.
By requesting a download link you acknowledge that you are the owner or authorized user of a compatible Gilian air sampling pump.
- After clicking the download link in your email, please select "Run" to begin the installation.
- Click "Run" to begin the installation.
The following tips will help you with operating Gilian CONNECT pump and sampling data management software:
- Gilian CONNECT is compatible with Windows 7, 8, and 10
- Current Version: 188.8.131.52
- GilAir Plus pumps with Firmware 2.5.0 and higher require Gilian CONNECT version 184.108.40.206 or higher
- If you're experiencing trouble with automatic software updates from Version 220.127.116.11, please download the latest software version on this website (see above) or install 18.104.22.168 or higher from an updated CD
- If you would like any assistance downloading, installing, or using Gilian CONNECT, please contact [email protected].