Svantek Vibration Accelerometers--SV80, SV81, SV84, SV85

SV80: General Purpose Vibration Accelerometer
The SV 80 is an industry standard IEPE piezoelectric accelerometer offered for Svantek’s Vibration Level Meters (974, 977A, 979, 958A).
It is an ideal choice for walk-around vibration measurement in the rugged environments of INDUSTRIAL machinery monitoring, such as pumps, motors etc.
The accelerometer is mounted on a vibrating surface with the mounting magnet or threaded stud.
SV81: General Purpose Vibration Accelerometer
The SV 81 is an industry standard IEPE accelerometer offered for Svantek’s Vibration Level Meters (974, 977A, 979, 958A).
The accelerometer’s HIGH SENSITIVITY AND LOW ELECTRONIC NOISE enable measurements of very low vibration amplitudes over the typical machine’s frequency operating ranges.
The accelerometer is mounted on a vibrating surface with the mounting magnet or threaded stud.
SV84: Building Vibration Accelerometer (works with the SVAN 958A)
SV 84 is a LOW-NOISE, hermetically sealed triaxial piezoelectric accelerometer designed to monitor building and ground vibrations with SVAN 958A analyzer.
A hermetically sealed glass connector protects the SV 84 from harmful dust and moisture enabling the OUTDOOR use without additional enclosures.
Signal ground is ISOLATED from the mounting surface and outer case to prevent ground loops.
SV85: General Purpose Vibration Accelerometer (works with the SVAN 958A)
The SV 85 is an IEPE based TRIAXIAL ACCELEROMETER designed for general purpose vibration measurements with the SVAN 958A four-channel analyser.
The HERMETICALLY SEALED tri-axial industrial piezoelectric accelerometer is suitable to monitor the vibration in harsh industrial environment.
Signal ground is ISOLATED from the mounting surface and outer case to prevent ground loops.
SV 80 General Purpose Vibration Accelerometer Specification
Performance |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Number of Axes |
1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Sensitivity ± 5% |
10 mV/(m/s2) ~ 100 mV/g |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Measurement Range |
0.01 m/s2 RMS ÷ 500 m/s2 Peak |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Frequency Response |
0.5 Hz ÷ 14 000 Hz |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Resonant Frequency |
25 kHz |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Residual Noise (1 Hz, 24°C) |
30 μg RMS |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Residual Noise (1 Hz to 25 kHz, 24°C) |
300 μg RMS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Electrical |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Supply Current (IEPE) |
2 mA ÷ 10 mA |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Supply Voltage (IEPE) |
22 V ÷ 28 V |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SV 81 General Purpose Vibration Accelerometer Specification |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Click on a file below to open. Visit our Technical Library for further documents and resources.
Filename | Filesize |
Sensidyne-SV80_18.pdf | 440.92 kB |
Filename | Filesize |
Sensidyne-SV81_18.pdf | 412.91 kB |
Filename | Filesize |
Sensidyne-SV84_18.pdf | 415.08 kB |
Filename | Filesize |
Sensidyne-SV85_18.pdf | 418.11 kB |