The SensAlarm FLEX is a fully-configurable gas detection solution designed for a wide range of applications. It offers a unique blend of flexibility, advanced features, and ease of use, making it ideal for industrial environments, laboratories, and other critical safety areas.
CE MarkApproval Ratings
Utilizing the magnetic wand, SensAlarm Flex shares a non-intrusive interface with SensAlarm Plus, SensAlert ASI, and SensAir, which provides user access to setup, data review, and maintenance menus without opening the enclosure and declassifying the area. Menus are intuitive and provide general instructions for calibration and testing.
Ypsilanti WWTP Reduces H2S Monitoring Costs with Sensidyne
Reach out to Our Expert Team for Tailored Safety Solutions and Technical Guidance.
SENSORS
Gas – All Sensidyne Plus Series sensors
ToD – Test-On-Demand available for specific toxic sensors
ELECTRICAL
Design – Microprocessor based with nonvolatile memory. Automatically resumes operation after power failure
Power – 100-240 VAC, 50/60 Hz or 20-30 VDC
Battery – Optional battery back-up available
Outputs – 4-20 mA into 600 ohms; Standard Modbus RS-485 RTU or Ethernet TCP
Light Stack – (NEMA 4X) optional up to 4 strobes with red, amber, blue, and green strobes
Horn – 95 dB piezo horn
Relays – 4 standard SPDT configurable relays. Optional 4 more SPDT configurable relays. Contact ratings: 6 amps at 120 VAC or 28 VDC resistive, 3 amps at 240 VAC resistive.
ENCLOSURE
Material – Polycarbonate
Environment – NEMA 4X design
Type – Wall mount with tabs
Overall Size – W x H x D: 8 x 10 x 6 in. / 20.3 x 25.4 x 15.24 cm
Weight Range – 12.25-24.17 lbs / 4.57-9.02 kg (with 1-2 sensor heads)
Conduit – 3/4 inch NPT connector supplied (side).
Temp: -4° to 122°F / -20° to 50°C
Humidity – 0-90 %RH, non-condensing.
Location – Indoor or Outdoor
Sensor Head – Enclosure and retaining ring are black anodized aluminum, PVC, or 316 stainless steel; splash guard and most other accessories are made of PVC.
DISPLAYS & CONTROLS
Display – 7 in. / 17.8 cm color LCD
Security – Password Protected Configuration Menu
Auto Config – System automatically senses the presence of optional modules and features
Reset/silence – External push button switch for acknowledge (Alarm sequence 3A)
Annunciators – Audible (+95dB) & Visual single strobe with optional second strobe
APPROVAL RATINGS
TUV – CAN/CSA C22.2 No. 61010-1-2012
UL 61010-1:2012
EN 61010-1:2010
CE Mark
