Celebrating 10+ Years as our MVP - The Industry's Most Versatile Pump.
Trusted by IH Professionals Around The Globe.
One Air Sampling Pump with All the Features You Need and Want
3 Prime Updated Technologies
- Motion Detection
- Bluetooth Connectivity
- Gilian CONNECT Mobile App
Also Features:
- QuadModeSM Air Sampling Technology
- Selectable Automatic Fault Recovery
- Standard Temperature & Pressure (STP) Correction
- Superior Design & Comfort
- Real-time Clock with Data-logging
Read Our Report on "Air Sampling for COVID-19," including solutions with the GilAir Plus
Motion Detection
Detect and measure up to 3 levels of activity (active, stationary, inactive) of each worker, ensuring sample integrity
Bluetooth Connectivity
- Remotely monitor an air sampling pump up to 5 meters (16.4 ft.) away
- No disturbance of the worker
- Stay in unrestricted areas while workers are in restricted areas
- No need to suit up
CONNECT Mobile App
- Apple Mobile App Compatibility:
- iPod Touch, iPhone, and iPad
- iOS 10 through iOS 13
- 64 bit
- Android Mobile App Compatibility:
- OS Version: 6 or higher
- 64 bit
- Bluetooth 4.0 or higher
- Start, stop or pause the sample remotely
- Monitor and graph flow rate, sample run time, and volume remotely
- Perform real-time remote assessments:
- Identify if cassette is overloading
- Identify if filter media is detached
- Sample audits provide the following on a smart phone or tablet:
- Report of current conditions
- Screen shot of current conditions
- Time stamp
- GPS coordinates (actual address)
- Pump number
- E-mailable report
- Check the status of multiple pumps in the same area
=> Go to Gilian CONNECT tab to download PC software
Please contact Sensidyne’s Software Support Team at [email protected] with questions regarding additional devices or support for this application.
Innovation Delivered: The ultimate personal air sampling pump delivering enhanced performance, greater versatility, and superior design and comfort.
The Widest Flow Range of Any Personal Air Sampling Pump
The GilAir® Plus features wide dynamic flow and pressure ranges to address all personal air sampling methods with flow ranges between 20 and 5,100 cc/min. With patent pending QuadModeSM air sampling technology, the GilAir Plus can perform both high-flow constant pressure and constant flow (450-5,100 cc/min) and low-flow constant pressure and constant flow (20-499 cc/min) with a single pump without external adaptors. It's like getting two pumps in one.
Unmatched Versatility
- Samples particulates, vapors, gases, and metal fumes
- Works with all common sampling media
- Multi-language capability: English, Spanish, French, Italian, Dutch, Portuguese and German
- Outlet port for bag sampling
High Performance
GilAir Plus is a smart air sampling pump that provides ambient or standard temperature and pressure corrected display (STP model) and data-logging for up to 16 sampling events (STP and Datalog model). The pump has high back pressure capability of up to 40" H2O in high flow and up to 40" H2O in low flow. An automatic self check system ensures sample accuracy. In the event of a fault condition, the pump's selectable automatic fault recovery feature attempts to restart the pump up to 10 times every 3 minutes to determine if the fault condition has been cleared.
Ease of Use
An intuitive menu, keypad interface and large, easy-to-read back-lit display makes adjusting pump settings quick and easy. Once the pump is set up, the keypad can be locked to prevent tampering. Convenient and innovative SmartCalSM feature provides automatic pump calibration.
Ergonomic Design
One-third smaller than traditional personal air sampling pumps and weighing less than 21 oz. (595 g), the GilAir Plus provides superior operator comfort. An integrated belt clip securely attaches the pump in a horizontal position, allowing workers a full range of motion to perform a wide variety of tasks without interference or discomfort.
Communications
The GilAir Plus dock provides charging and communication functions for the STP and data-logging models. Once docked, the PC application allows users to review datalogs, generate sampling reports, manage sampling programs, and create pump set-up profiles that expedite deployment of large pump fleets. The SmartCalSM feature uses the dock as a communication link between appropriate calibration devices and the GilAir Plus. SmartCalSM automates calibration and records pre and post sample calibrations in the pump's datalog.
Gilian CONNECT is our industry-leading PC application for managing air sampling data and Gilian Plus Series pumps.
Click to learn more about Gilian CONNECT
Barometric Pressure Compensation
When sampling at altitudes of up to 8,000 feet above or 8,000 feet below sea level, GilAir Plus has the capability of automatically correcting the flow rate for altitude changes to maintain constant flow accuracy of +/- 5% over this barometric pressure range. This feature permits GilAir Plus calibration at ground level and sampling at high elevations or deep mines without loss of flow accuracy or the need to calculate and use manual correction factors. GilAir Plus is the only personal air sampling pump with this capability.
Download the Barometric Pressure Sampling Note
NEW! Gilian GilAir Plus Features & Benefits Overview
NEW! How to Calibrate a High-Flow Split Manifold
=> For media on a GilAir Plus pump, using a Go-Cal Pro calibrator
PRODUCT SPECIFICATIONS
Performance
Firmware
Current Version: 2.5.4 (6/20/17)
Flow Range
Constant flow 20 - 5,000 cc/min. without external adaptors
Constant pressure 1 - 5,000 cc/min without external adaptors
Flow Modes
Constant Flow or High and Low Flow Constant Pressure
Accuracy
Flow Display ± 5% or 3 cc/min of set flow, whichever is larger
Constant Flow Control ± 5% or 3 cc/min of set flow, whichever is larger
Constant Pressure Control ± 10% of back-pressure
Back Pressure Capability
(8-hour runtime) 5000 cc/min. up to 12” H20 back pressure
4000 cc/min. up to 20” H20 back pressure
3000 cc/min. up to 30” H20 back pressure
2000 cc/min. up to 30” H20 back pressure
1000 cc/min. up to 35” H20 back pressure
450 - 1000 cc/min. up to 40” H20 back pressure
20 - 449 cc/min. up to 40” H20 back pressure
Run Time 8 hour minimum
Flow Fault If flow changes exceed 5% within back pressure specifications, fault notification appears. If fault exceeds 30 seconds, pump shuts down. Selectable automatic fault recovery allows the pump to attempt restart every 3 minutes for up to 10 times or to hold until manual intervention.
Environmental
Temperature Ranges
Operating 32°F to 113°F (0°C to 45°C)
Storage -4°F to 113°F (-20°C to 45°C)
Charging 41°F to 104°F (5°C to 40°C)
Humidity Ranges
Operating 5-95 %RH, non-condensing
Storage 5-98 %RH, non-condensing
GENERAL
Display Flow rate, sample time, and sample volume in actual conditions
Controls
Indicators Green and Red LED’s
Dimensions 4.3 x 2.4 x 2.4 inches (10.9 x 6.1 x 6.1 centimeters)
Weight 20.5 ounce (581 grams)
Warranty 2 years from original shipment, 5 years for pump keypad, and 1 year on rechargeable NiMH battery pack
ELECTRICAL
Power Options Removable rechargeable nickel-metal hydride (NiMH) battery pack, optional alkaline battery pack, or DC power
Battery Level Indicator On-screen icon displays battery level
Interface Connectors All pump interface is carried out via the Dock or keypad
Dock Functions Battery charging, computer interface, and auto-calibration
Charging Time Under 3.5 hours
APPROVALS
ISO 13137:2013 Compliant
Intrinsic Safety
US/Canada NRTL (FM) Class I, Div 1 Groups A, B, C, D, E, F, and G;
Class II, Div 1 Zone 0; Class III, T4
ATEX/IECEx
II 1 G
Ex ia IIC T4
CE
Applicable Directives ATEX 94/9/EC
EMC 2004/108/EC (RFI) LVD 2006/95/EC
RoHS Compliant
Click on a file below to open. Visit our Technical Library for further documents and resources.
Gilian CONNECT is the update/upgrade to the previously released Gilian Pump and Data Management Software. CONNECT allows users to import previous databases to take advantage of its extended features and capabilities.
Gilian CONNECT is an essential tool that assists Industrial Hygienists and Occupational Health and Safety professionals to overcome the challenges of organizing air sampling data, creating sampling reports and managing pump fleets.
-
Centralize sampling data for reporting, analysis, archiving and retrieval.
-
Save time with reusable report templates and auto-complete data from database entries
-
Enter lab result data into sampling records and quickly create customizable reports for printing, PDF e-mailing, or saving to disk
-
Configure and program air sampling pumps for rapid deployment
Gilian CONNECT is the ultimate air sampling data and pump management software solution that automates tasks and simplifies record administration. The application can be fully customized to user preferences including measurement units, storage of worker information, and creation of reporting templates. Gilian CONNECT will save professionals valuable time while enhancing analysis capabilities and gaining improved control over their sampling data.
Download Gilian CONNECT PC Software for Laptop/Desktop
To download Gilian CONNECT pump and sampling data management software submit your name and email address. A secure link will be emailed to you.
By requesting a download link you acknowledge that you are the owner or authorized user of a compatible Gilian air sampling pump.
- After clicking the download link in your email, select "Run" to begin the installation.
DOWNLOAD ISSUES?
If you have any issues with downloading and/or running the .EXE files- please open the following PDF for instructions on downloading a ZIP file of the installation files:
> Gilian Connect Software Installation download
Tech Tips
The following tips will help you with operating Gilian CONNECT pump and sampling data management software:
- Current Version: 2.2.1.0
- GilAir Plus pumps with Firmware 2.5.0 and higher require Gilian CONNECT version 2.2.1.0 or higher
- If you're experiencing trouble with automatic software updates from Version 2.1.1.0, please download the latest software version on this website (see above) or install 2.2.1.0 or higher from an updated CD
Gilian CONNECT Mobile App
Gilian CONNECT Mobile enables users of Bluetooth-equipped GilAir Plus pumps to connect to live data streams from their active pumps for verification of sample activity including flowrate, backpressure, pump motion, sample volume, and predictive runtime; STP model pumps also provide STP data in their data stream. When connected to an idle pump, Gilian CONNECT Mobile provides the ability to review past sample records from the pump’s datalog. The application additionally provides function to start, pause, and stop a sample run.
- Start, stop or pause the sample remotely.
- Check the status of multiple pumps in the same area.
- Monitor and graph flow rate, sample run time, and volume remotely.
- Perform real-time remote assessments:
- Identify if cassette is overloading
- Identify if filter media is detached
- Sample audits provide the following on a smart phone or tablet:
- Report of current conditions
- Screen shot of current conditions
- Time stamp
- GPS coordinates (actual address)
- Pump number
- E-mailable report
Download the App from your device's App Store.
Apple Mobile App:
- iPhone: Requires iOS 8.0 or later.
- iPad: Requires iPadOS 8.0 or later.
- iPod touch: Requires iOS 8.0 or later.
- Mac: Requires macOS 11.0 or later and a Mac with Apple M1 chip.
- Version 3.1
- Requires Android 4.4 or higher