Sensidyne Industrial Health and Safety

Gilibrator 2-USB Calibrator

The Tried-and-True Standard for Air Flow Calibrators

Gilibrator 2-USB Calibrator

True Primary Standard (NIOSH) Wet Cell calibrator — accuracy and performance validation for sampling pump air flows from 1 cc/min to 30 LPM 

Gilibrator Air Flow Calibration KitThe Gilibrator 2 System provides users with a convenient and highly automated way to check almost any commercially available air sampling pump for proper air flow function before deployment. The system consists of an electronic Gilibrator 2-USB Base which is used with any of three sizes of wet bubble cells. These patented interchangeable components are also available as part of kits which can also include a complete calibration diagnostic panel. All cells use a twist-on bayonet design for quick and easy mounting to the base. All are certified for accuracy and traceable to NIST.

Calibration Cells

Three bubble cells are available, for air flow ranges of 1 to 250 cc/min (low flow cell), 20 cc/min to 6 LPM (standard flow cell) and 2 to 30 LPM (high flow cell). These interchangeable wet cells generate perfect bubble films at the touch of a button. An infrared sensor reads the bubble flow rate, which is then calculated and displayed.

Gilibrator 2-USB Base 

Easy to operate, microprocessor-controlled unit features simple on/off and reset touchpad with large LCD screen that displays flow rate, the calculated average of multiple flow samples in a series and the sample number. Light in weight, it operates with either AC power or rechargeable batteries (8 - hour life) for easy portability in either the lab or the field.  

Gilibrator 2-USB Diagnostic Kit

Offers the industrial hygienist a complete, portable calibration laboratory.  Consists of Gilibrator 2-USB Base with three wet bubble cells in a cushioned carrying case, with a full diagnostic panel built into the top lid of the case.  The panel uses an interchangeable rotameter design for 2 to 5,000 cc/min flow capability and will run any of several diagnostic tests: "Load" simulation - Offers two load simulations for high and low flows to imitate sample line back-pressures. Back-pressure reading - A built-in Magnehelic® gauge allows visual monitoring of in-line back-pressures up to 40" H2O (10 kPa). Leak checking - Built-in Magnehelic® gauge allows visual leak testing and monitoring capabilities. Pump flow adjustment - Rotameters allow instant visual indication of approximate flow rates, assisting in properly adjusting air flows.

Optional PC ISensidyne Gilian Gilibrator Air Flow Calibrator Optional PC Interface Kit & Printernterface Kit & Printer

A PC Interface Kit is available for real-time data download and manipulation. The kit includes a cable for connecting a computer to the RS-232 port of the Gilibrator 2-USB Base, as well as software that allows the user to log pump and calibrator serial numbers, data, operator name, flow rates, averaging data, number of samples, sample sequence, and standard deviation data. An optional printer is available for hard copy printouts of calibration data. 

Gilibrator 2-USB Specifications

Low Flow Cell 
Dimensions:  2W x 4H x 2.1"D (51W x 102H x 53mmD)  
Weight: 0.4 lbs.  (.18 kg)

Standard Flow Cell 
Dimensions:  2.5W x 6H x 2.6"D (64W x 152H x 66mmD)  
Weight: 0.82 lbs.  (0.37 kg)

High Flow Cell  
Dimensions: 3.5W x 8.1H x 3.7"D (89W x 206H x 94mmD)  
Weight: 2.26 lbs.  (1.02 kg)

Flow Range, Accuracy  
Low Flow Cell, 1 - 250 cc/min, ±1% of reading accuracy; 
Standard Flow Cell, 20 cc/min to 6 LPM, ±1% of reading accuracy; 
High Flow Cell, 2-30 LPM, ±1% of reading accuracy.

Temperature Limits
Operating Temperature: 5° to 35°C (41° to 95°F);
Storage Temperature: 0° to 50°C (32° to 122°F)

Electrical
DC Power Source: Internal Battery Pack;
AC Power Source: Continuous operation through adapter/charger;  
Battery Charge Time:14 Hrs.;
Expected Battery Life: over 300 charge/recharge cycles;
Transmission Link:   RS-232;  
Interface Connectors: Charger Jack (2.1mm barrel jack), Printer Jack (DB-25), SensorJack - Wet Cell (DB-9)

Item

Part No. Model

Description

Low-Flow Wet Cell Kit (1 to 250 cc)

800272 (120V)

Control base, low flow cell, DC charger/AC power supply, tubing and soap solution with dispenser in hard shell carry case.

800272-2 (230V)

Std. Flow Wet Cell Kit (20 cc to 6 LPM)

800271 (120V)

Control base, standard flow cell, DC charger/AC power supply, tubing and soap

800271-2 (230V)

solution with dispenser in hard shell carry case.

Std. Flow Wet Cell Diagnostic Kit

800844-2 (120V)

Same items as Standard Flow Wet Cell Kit, but carry case also includes built-in

800844-2-230 (230V)

diagnostic panel with rotameters and pressure gauge.

High-Flow Wet Cell Kit (2 to 30 LPM)

800270 (120V)

Control base, high flow cell, DC charger/AC power supply, tubing and soap

800270-2 (230V)

solution with dispenser in hard shell carry case.

Deluxe Wet Cell Kit (All Three Cell Sizes)

800275 (120V, w/ printer)

Control base, three interchangeable wet cells for low, standard and high flow rates, DC charger/AC power supply, tubing and soap solution with dispenser, in hard shell carry case. Thermal printer not included but available as option.

800275-2 (230V, w/ printer)

801804 (120V, no printer)

801804-1 (230V, no printer)

Deluxe Wet Cell Diagnostic Kit

800844-4 (120V, w/ printer)

Same items as Deluxe Wet Cell Kit, but carry case also includes built-in diagnostic panel with rotameters and pressure gauge.

Calibrator Control Base

850190-1

Includes Battery Pack. Charger sold separately.

Control Base Charger

401984 (120V)

For Gilibrator 2 Base (part numbers 850190 and 850190-1)

7017010 (230V)

For Gilibrator 2 Base (part numbers 850190 and 850190-1)

400674 (120V)

For Gilibrator Base (obsolete) (part number 800268)

400794-1 (230V)

For Gilibrator Base (obsolete) (part number 800268)

Low Flow Sensor & Cell Assembly
(1 to 250cc)

800267-1

Sensor and cell assembly only. Includes calibration certificate.

Standard Flow Sensor & Cell Assembly (20cc to 6 LPM)

800266-1

Sensor and cell assembly only. Includes calibration certificate.

High Flow Sensor & Cell Assembly
(2 to 30 LPM)

800265-1

Sensor and cell assembly only. Includes calibration certificate.

Replacement Battery Pack

700560

For Gilibrator-2 Control Base only.

Replacement Battery Pack

400692

For Gilibrator Control Base only.

PC Interface Kit

811-0501-01

Includes special RS-232 connecting cable and software

Printer Module, 110v

800274

Includes printer paper, connecting cable and AC adapter.

Printer Module, 230V

800274-230

Includes printer paper, connecting cable and AC adapter.

Cable For Printer

800311

Includes 16-inch connecting cable.

Printer Paper

400681

For Gilibrator Printer Module, part no. 400793 (five pack)

402103

For Gilibrator 2 Printer Module, 110v, part no. 801806 (one pack)

402127

For Gilibrator 2 Printer Module, 230V, part no. 700721 (one pack)

Soap for Gilibrator Cell (8 oz.)

800450

For both Gilibrator and Gilibrator 2.

Soap Dispenser

400667

For both Gilibrator and Gilibrator 2.